On standard solid bowl screen centrifuges the screening section is connected to the small diameter of the solid bowl cone and the diameter of the screen is identical. This design has the disadvantage of a low volume in the dewatering section of the centrifuge. This leads to a high solids load and the lowest centrifugal force at the solid outlet.
The SIEBTECHNIK TEMA TURBOSCREEN screen bowl decanter centrifuge, is in screen-diameter and -design adapted to the specific application.
The solid materials are separated by means of sedimentation in the solid bowl and thickened. This is followed by our special designed and dimensioned screen. Bearings on both sides allow high centrifugal forces and long residence times.
Centrate, filtrate and solids are discharged in separate outlets.
All SIEBTECHNIK TEMA TURBOSCREEN decanters are individually adapted to suit product conditions and process requirements.
Operational behaviour and mechanical characteristics
In the TURBOSCREEN the advantages of the solid bowl centrifuge and the screen centrifuge are optimally combined in two work stages.
In the first process step the solid matter is pre-dewatered on the bowl cone in the solid bowl centrifuge section. The filling volume of the bowl and so the length of the drying section can be steplessly adjusted by means of a weir plate. The clarified liquid is decanted off over this weir plate.
The pre-thickened solid is discharged over a discharge edge into a much larger dimensioned screen bowl fitted downstream. Here at the second work stage the solids cake is broken up and redistributed with a lower head of material proportional to the larger volume capacity.
At the same time the solids cake is subjected to considerably higher centrifugal forces proportional to the large diameter, whereby the filtering out of the residual liquid is made easier.
Because with the well thickened solid matter only comparatively little liquid passes into the screening section, the carry-over of very fine grains through the screen bowl is small and because of recirculation into the centrifuge cannot be rated as a loss.
The generously dimensioned screen bowl with the low solid matter content is likewise especially suited for washing. Here the washing liquid is drained off separately from the mother liquor.
Drives for centrifuges
The solution to a separation task depends very decisively on the centrifuge drive. The centrifugal force required for solid-liquid separation is determined by the bowl or screen speed. To achieve the right speed for optimum separating results, it is frequently necessary to keep the speeds variable. The drive control needed for this is designed by our specialists specifically to fit your application.
Furthermore, on screen worm centrifuges and in decanters the speed differential between the solid-conveying worm and the bowl is decisive. It determines the time which the solid spends in the centrifuge and so the quality of the drying. The correct speed differential for your separation task is determined by the correct choice of gear unit. The speed differential here may be constant, but may also be variable. In the latter case the back-drive, where the otherwise fixed gear input shaft is also driven, is used. If the worm speed is required to be kept completely independent of the drum speed, hydraulic drives (viscotherms) or two-stage gear units with an upstream differential planetary stage are used.
To guarantee the operational reliability of your centrifuge, the drive system is continuously monitored. Excessive speeds, overcurrent and slip are identified and reported to the machine control system and there processed.
Only a drive system specially designed for your separating task will give optimum separating results.
Explosion protection / inertising
Inertisation of our machines and systems may be necessary for various reasons. In many industrial processes it is necessary for safety reasons to reliably prevent the build-up of an explosive atmosphere through dust or gases (ATEX).
It may also be necessary to seal and overlay the product spaces with inert gas, e.g. nitrogen (N2) or carbon dioxide (CO2), to prevent oxidation and maintain product quality.
Use SIEBTECHNIK specialialists’ many decades of experience in all areas of industry to help seal and inertise the process spaces in your centrifuges.
We will be pleased to work with our customers to draw up an inertising concept for the integration of our machines into existing or scheduled plant systems.
Hygienic Design / CIP
The name SIEBTECHNIK is inseparably associated with dewatering tasks to meet the most stringent hygiene requirements. The separation of batter from frying oil at temperatures of approx. 200°C with the SHORTBOWL decanter centrifuge, the centrifuging of lactose crystals with the SHORTBOWL decanter centrifuge and the CONTURBEX screen worm centrifuge for the manufacture of baby food or the manufacture of extremely pure inorganic salts with our CONTURBEX and pusher centrifuges are some examples. Design features for this are the technical separation of the drive and processing sections of the centrifuge and highly developed sealing systems that are easy to clean by CIP.
For the optimisation of centrifuges in the hygiene sector and/or in areas where e.g. cross-contamination has to be prevented by CIP we use riboflavin tests to examine and optimise cleaning results.
Our self-developed and USDA-certified CIP nozzles, self-developed hygienic screw connections, special hygiene surfaces or our highly developed USDA-conformant sealing technology make many dewatering tasks possible only with our centriguges.
Our reliable service enables optimum operation of your machines and systems. We offer energy optimisation, machine monitoring, an on-site maintenance and & repair service, OEM spare parts, damage cause analysis, maintenance & repair kits, stock inventory analysis, machine history management, personal technical consultation, training & workshops, 24 hr service, retrofitting & upgrades and used & loan machines.
Ask us, we’re there for you.
SIEBTECHNIK/TEMA has consistently developed itself into one of the world’s most innovative manufacturer of continuous centrifuges and suppliers of system solutions in the field of mechanical and thermal solid-liquid separation since the early 1940s. SIEBTECHNIK/TEMA is your reliable partner for customer-focused, custom-built machines and system solutions.
SIEBTECHNIK/TEMA centrifuge and drier systems offer you the latest technology, customer- and product-specific special fittings and individual consultation at the pre-sales stage and reliable support in the after-sales process. For mechanical liquid separation continuously operating centrifuges are often the technically and economically best solution. They separate large volumes in closed housings with little space requirement and low energy and time costs. Also drying on the fluidised bed with fluidised bed driers and coolers has established itself in numerous branches of industry and applications.